MIMAKI JV5-320S Specifications download pdf (Page 40)

3 Printing

3-10

If the media cannot be detected automatically

In some cases, the media cannot be detected automatically depending on the set media. In this case, detect

the media by following procedures below:

STEPS:

1 Set the “MEDIA DETECT” in the setting function to “MANUAL”.

Set this by referring to P.6-2.

2 Start detecting media by pressing the [END] key.

3 Press the [] or [] keys to enter the thickness of the set media and then press the

[ENTER] key.

You can enter values from 0.1 to 5.0 mm.

When the [MEDIA DETECT] in the setting mode to “AUTO”, entering the thickness of the media starts detect-

ing media. (After detecting media, it returns to the local mode.)

When the [MEDIA DETECT] in the setting mode to “MANUAL”, proceed to the Step 4.

4 Press the [] or [] keys to enter the width of the set media and then press the

[ENTER] key.

You can enter values from 210 to 3300 mm.

MEDIA DETECT

START WHEN [END] HIT

The thikness of the

media is inputted.

(range : 0.1 - 5.0 mm)

= 0.1mm

The thikness of the

media is inputted.

(range : 0.1 - 5.0 mm)

= 0.1mm

The width of the

media is inputted.

(210 - 3300mm)

= 1600mm

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 129 130

No comments

MIMAKI JV5-320S Specifications Page 40