MIMAKI JV5-320S Specifications Page 75
- Page / 130
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
6-15
Invoking MACHINE SETUP functions
Invoking MACHINE SETUP functions
List of functions
This section describes briefly the machine setup functions and their setting values.
Name Function
Page in this
manual
REAR MIST FAN Set the mist fan in the rear of the machine. P.6-17
Feeding/TakeUP
For heavy-duty feeding / take-up device, set whether to use or not to
use.
In addition, sets the position of the tension bar (LOW/HIGH).
P.6-17
DRYNESS FEED Change the feed operation after printing. P.6-18
CONFIRM. FEED
Set whether or not to perform feeding the media after test printing for
checking of the printing result.
P.6-18
PRE-FEED METHOD Switch the pre-feed operation method. P.6-18
HEATER SETUP Change the temperature range of the post-heater that determines whether
the temperature is reached.
P.6-18
TIME SET Set the date and time on the printer. P.6-18
UNIT SETUP Change the units of temperature, length and area to be used with the printer. P.6-19
STAMP SETUP
Make settings for outputting the date and time and printing conditions after
printing.
P.6-19
CART. PRIORITY
You can select the cartridge status to use first with the double cartridge
function of ink supply.
P.6-20
Test Draw Arrange
You can set the placement direction of the drawn test pattern when perform-
ing test drawing repeatedly.
P.6-20
MACHINE NAME
When the printer is connected through the USB 2.0 interface to a system to
which two or more machines are connected, set the identifier of the printer
to have the system recognize it.
P.6-20
ENV. TEMP.
Set the operation when drawing was tried to start with the temperature of
the place where this machine has been installed being outside the range of
usable temperature.
P.6-20
INFORMATION
Displays various information.
In Local Mode, it can also display by pressing the [INFORMATION] key.
P.6-21
- OPERATION MANUAL 1
- Foreword 2
- TABLE OF CONTENTS 3
- CHAPTER 4 Daily Care 4
- CHAPTER 5 In Case of Trouble 4
- CHAPTER 1 7
- Safety Precautions 7
- Basic specifications 9
- 1 Safety Precautions 10
- Specifications for ink 11
- CHAPTER 2 13
- Before Use 13
- Configurations and Functions 14
- BL Light Blue 16
- Operation Panel 17
- 2 Press the [FUNCTION] key 18
- Outline of menu hierarchy 20
- Direct keys 22
- SET UP functions 23
- 2 Before Use 24
- MAINTENANCE functions 25
- MACHINE SET functions 28
- NCU functions 30
- CHAPTER 3 31
- Printing 31
- Adjusting the head gap 32
- Attach the platen sheet metal 34
- Remove the platen sheet metal 35
- 3 Printing 36
- Entry of right edge 41
- [ < ] or [ > ] key hit 41
- When the media left 41
- OK The media has wrinkles 42
- Adjust it 42
- [6]Set the media press 43
- For transfer paper 44
- Input of MediaLength 46
- MEDIA LENGTH = 50 m 46
- Clamp fixing spacer 47
- Media edge surface 47
- Effective Plotting Area 48
- Establishing the Origin 49
- Other notes 50
- Cut it using scissors etc 51
- Setting value : 52
- OFF, WEAK 52
- Little WEAK 52
- STANDARD, STRONG 52
- CHAPTER 4 53
- Daily Care 53
- Routine Maintenance 54
- 1 Pull the filter Assy out 55
- L. *> [JV5-01] 56
- ST.MAINTENANCE 56
- CARRIAGE OUT <ENT> 56
- COMPLETED <ent> 57
- * Being Initialized * 57
- PLEASE WAIT 57
- 4 Daily Maintenance 58
- CHAPTER 5 59
- In Case of Trouble 59
- Warning errors newly added 60
- Error messages newly added 60
- CHAPTER 6 61
- Operation for Functions 61
- Invoking SET UP functions 62
- Page in this 63
- (See P.6-28) 64
- INK LAYERS 66
- DRYING TIME 66
- PRE-FEED 67
- COLOR PATTERN 68
- DRYNESS FAN 68
- PRIORITY 69
- AUTO CLEANING 69
- Maintenance while printing 69
- (See P.3-2) 70
- List of functions 71
- 2 Press the [ST.MAINT] key 72
- [MEDIA RESIDUAL] 73
- L. ∗ > [JV5-01] 76
- FUNCTION 76
- MACHINE SETUP <ENT> 76
- REAR MIST FAN 77
- Feeding / TakeUP 77
- DRYNESS FEED 78
- CONFIRM. FEED 78
- PRE-FEED METHOD 78
- HEATER SETUP 78
- TIME SET 78
- UNIT SETUP 79
- STAMP SETUP 79
- CART. PRIORITY 80
- Test Draw Arrange 80
- MACHINE NAME 80
- Ambient temperature 80
- Serial&DealerNo 82
- NCU <ENT> 83
- Outline of the NCU functions 84
- NG JUDGEMENT (*1) 85
- COND.INDICATION 85
- DISPLAY setting 86
- Applied settings of functions 87
- Detailed settings of heaters 88
- Input range: 89
- PRE [OFF, 20 - 60] ° C 89
- POST [OFF, 20 - 70] ° C 89
- How to operate function menus 90
- Change is 91
- Functions related to ink 92
- JV5-320DS 94
- Function Flowchart [BOOT] 95
- 6 Operation for Functions 100
- CLtypeSetWithFUNCkey 109
- D202100-13-31102014 128
- Printed in Japan 130
Related products and manuals for Print & Scan MIMAKI JV5-320S
Print & Scan MIMAKI Tx2-1600 Instruction Manual
(166 pages)
(166 pages)
Print & Scan MIMAKI UJF-6042 User Manual
(2 pages)
(2 pages)
Print & Scan MIMAKI TS5-1600AMF User Manual
(22 pages)
(22 pages)
Print & Scan MIMAKI JV33-160 Specifications
(202 pages)
(202 pages)
Print & Scan MIMAKI JV3-75SPII Specifications
(150 pages)
(150 pages)
© 2020, manymanuals.com. All rights reserved. | 0.106 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals