MIMAKI JF-1631 Specifications download pdf (Page 15)

xiv

For safe operation

CAUTION

Ink cartridges

• If the ink cartridge is moved from a cold

place to a warm place, leave it in the room

temperature for three hours or more before

using it.

• Open the ink cartridge just before installing

it in the printer.If it is opened and left for an

extended period of time, normal printing

performance of the printer may not be

ensured.

• Make sure to store ink cartridges in a cold

and dark place.

• Be sure to thoroughly consume the ink in

the ink cartridge after opened.If an

extended period of time has passed away

after opening the cartridge tank, printing

quality would be poor.

• You cannot use any other ink type than the

exclusive one. If you use any other ink

type, it may cause the damage for the

device. To repair of the device is your

responsibility as used instead the exclusive

one.

• Never refill the ink cartridge with ink.

• Neither pound the ink cartridge nor shake it

violently so as to prevent leakage of ink

adhering locations.

Warning labels Handling the Anti-freezing liquid

• This device is adhered with a warning

label.Be sure understand firmly the

warnings given on the labels.In the case

where any of the warning label has become

so soiled that the warning message is

illegible or has come off, purchase a new

one from your local distributor or our office.

Refer to Appendix for the label

• Be sure to store the Anti-freezing liquid in a

cold and dark place.

• Store the Anti-freezing liquid in a place that

is out of the reach of children.

About UV light About hot parts

• There is some leaking of ultraviolet

radiation around the UV lamp.UV light

applied to your skin might cause

inflammation and/or skin cancer.Though

weak UV light might cause no

inflammation, repeated exposure to it may

lead to chronic disorders.Avoid applying

UV light to your skin and eyes.

• Impairment of eyes caused by UV light may

be:Acute disorders ... Pain in eyes,

tearing,etc.Chronic disorders ... Cataract,

etc.

When using this device, take protective

measures such as gloves, long-sleeve

cloth, light-resistant mask, attached light-

resistant glasses, etc.

• The UV lamp and the interior of the UV

irradiation device will have a very high

temperature.When carrying out

maintenance, wait until the temperature

has been sufficiently lowered after the lamp

is turned OFF.

• Some parts outside the unit will have a very

high temperature.A hightemperature

caution label is placed on such parts.Do not

touch the parts with the caution label

placed and their vicinity, or burn injury may

occur.

• When it is unavoidable to touch hot parts,

be sure to wear heat-insulating gloves to

protect your hands.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 141 142

Comments to this Manuals

No comments