MIMAKI JF-1631 Specifications Page 60
- Page / 142
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
3-12
Setting the light intensity of the UV lamp
The light intensity of the UV lamp may be set in 3 stages.
This setting is made when the media vulnerable to the heat is used or when the test drawing is made in
which the lighting of the UV lamps is not desired.
1
Press the key in the local
mode.
2
Select the [SET UP] by pressing
the or key.
v
3
Press the key.
4
Select the [UV LEVEL] by pressing
the or key.
5
Press the key.
6
Press or keys to select light intensity.
• Set values :HIGH , STANDARD , LOW , NONE , NOPRINT
7
Press the key.
8
Press the key twice to finish
HIGH The UV lamp is lit with 100% of its light intensity.
STANDARD The UV lamp is lit with 60% of its light intensity.
LOW The UV lamp is lit with 40% of its light intensity.
NONE The UV lamp is not lit while drawing is being performed.
NOPRINT
The drawing is not performed and only the UV lamp is lit. Use when drawing is performed
without the UV lamp is lit etc., and when you wish to make it cure afterward. (Normally,
this setting will not be made.）
• The light intensity of the UV lamp may be set on the RIP side, when performing the remote
drawing. For details, please refer to the Instruction Manual of your RIP.
FUNCT I ON
VIEW <ENT>
FUNCTION
FUNCT I ON
SET UP <ENT>
SET UP
FEED COMP . <en t >
ENTER
SET UP
UV LEVEL <en t >
SET UP
UV LEVEL : H I GH
ENTER
ENTER
END
- MIMAKI ENGINEERING CO., LTD 1
- TABLE OF CONTENS 2
- Requests 6
- FCC Statement (USA) 6
- LASER SAFETY 7
- CDRH REGULATION 7
- Foreword 8
- Features 9
- For safe operation 10
- Never do the following 12
- Precautions for use 14
- Notes on UV lamp 16
- Notices for installation 17
- CHAPTER 1 19
- Before Use 19
- Installing the device 20
- Configuration and Function 21
- Operation Panel (JF-1631) 22
- Operation Panel (JF-1610) 23
- Carriage 24
- Capping Station 24
- Flushing BOX 24
- EMERGENCY SWITCH 25
- Connecting the cables 26
- UV irradiation device 27
- Function of indicator 27
- Setting of ink cartridge 28
- Handling of white ink 29
- About Media 30
- Menu mode 31
- CHAPTER 2 33
- Basic Operations 33
- When setting the media 34
- When drawing the image 34
- Operation flow 35
- Turning the power ON 36
- Setting the media 37
- Setting the media on JF-1631 38
- On the absorption area 39
- Using of Roll Sheet 40
- Test drawing 41
- Execution of head cleaning 42
- When cleaning with “Wiping” 43
- Priority is set to “HOST” : 44
- “HOST” is displayed 44
- Priority is set to “PLOT” : 44
- Interruption of drawing 45
- Move the Y-bar 45
- FUNCTION 46
- Turning the power OFF 47
- CHAPTER 3 49
- Useful Function 49
- Changing origin 50
- • Set value : 0.0 to 50.0mm 52
- Adjusting head gap 54
- Registering Head gap value 55
- Turing the UV lamp off 56
- Other useful functions 57
- Each setting 58
- Setting of priority 61
- • Default is “English.” 62
- Output the setting list 63
- Other useful settings 65
- Initializing set contents 66
- For setting media correctly 67
- CHAPTER 4 69
- Routine maintenance 70
- Ink cartridge 72
- Ink cartridge trouble 73
- Cleaning flushing BOX 74
- Articles required 76
- Set the empty waste ink tank 78
- Remove the filter Assy 80
- INT.WIPING 82
- PR I NT COUNT = 10 82
- MA I NT ENANCE 82
- INT.WIPING <ent> 82
- Samples of pattern drawn 83
- Press the key 84
- Changing the ink set 85
- Filling the ink 88
- Head maintenance function 92
- Special refresh 93
- Cleaning of wiper and cap 94
- COOL I NG 98
- WA S T E A F : e n t 98
- WATER CHNG 100
- SET AF : e n t 100
- Replacing exhaust blower 101
- Daily Maintenance 103
- Cleaning of UV lamp filter 104
- Replacing UV lamp 106
- Checking UV ink curing level 109
- Adjusting UV light level 110
- LEVEL CHECK 112
- WI PE START : en t 112
- HEAD MOVE : e n t 112
- Check the measured value 114
- CHAPTER 5 115
- In Case of Trouble 115
- If image quality declines 117
- Resolving nozzle clogging 117
- Error message 119
- CHAPTER 6 123
- Appendix 123
- Specifications 124
- Specifications for ink 125
- Position of the warning label 126
- Function Flowchart 129
- To be followed To be followed 130
- X OFFSET , Y OFFSET 130
- Followed Followed 132
- Japanese , English 138
- D201645-20-29082008 141
- FW : 2.80 142
- Printed in Japan 142
Related products and manuals for Print & Scan MIMAKI JF-1631
Print & Scan MIMAKI UJV500-160 User Manual
(32 pages)
(32 pages)
Print & Scan MIMAKI UJF-3042HG Specifications
(156 pages)
(156 pages)
Print & Scan MIMAKI UJF-3042HG User Manual
(73 pages)
(73 pages)
Print & Scan MIMAKI JV33-130 Specifications
(152 pages)
(152 pages)
Print & Scan MIMAKI JV5-320S Specifications
(298 pages)
(298 pages)
Print & Scan MIMAKI UJV500-160 Specifications
(156 pages)
(156 pages)
Print & Scan MIMAKI JV3-160S Setup Guide
(170 pages)
(170 pages)
Print & Scan MIMAKI UJF-706 Specifications
(184 pages)
(184 pages)
Print & Scan MIMAKI JV3-130SPII Specifications
(142 pages)
(142 pages)
Print & Scan MIMAKI JV5-130S Specifications
(292 pages)
(292 pages)
Print & Scan MIMAKI JV5-320S Specifications
(130 pages)
(130 pages)
Print & Scan MIMAKI Tx2-1600 Instruction Manual
(166 pages)
(166 pages)
Print & Scan MIMAKI UJF-6042 User Manual
(2 pages)
(2 pages)
Print & Scan MIMAKI TS5-1600AMF User Manual
(22 pages)
(22 pages)
Print & Scan MIMAKI JV33-160 Specifications
(202 pages)
(202 pages)
Print & Scan MIMAKI JV3-75SPII Specifications
(150 pages)
(150 pages)
© 2020, manymanuals.com. All rights reserved. | 1.271 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals