MIMAKI JF-1631 Specifications download pdf (Page 37)

2-5

Basic Operations

Setting the media

Setting the media on JF-1610

Switch over the suction valve at the

front of the table adjusting with the size

of the media to be set.

• The valve is opened when the knob is turned

vertically and closed when it is turned horizontally.

Pressing the key, put on the “VACUUM” lamp.

Pressing the key, absorb the media to the table.

• Turn ON/OFF the vacuum pressing the key.

• The absorption area will become as shown in the

figure on the right.

• When you want to change the point of origin, please

refer to P.3-2.

• If, within the absorption area, there are suction holes not closed by the media, close such

suction holes placing thin sheet form material such as paper, film or tape.

• The peripheral parts of the media could roll up due to heat. Fix the media supplementarily

using adhesive tapes, etc.

• Guide holes are provided at the edges (3 edges) of the table to insert the screw, etc. available

in the market. Use them as the guides for setting the media straight. ( P.3-19 )

Open Close

VACUUM/BLOW

ON/OFF

800

1600

Origin

Suction valve

Absorption area

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 141 142

No comments

MIMAKI JF-1631 Specifications Page 37