Execution of head cleaning
2-11
2
Basic Operations
When cleaning with “Wiping”
1
Press the key in the local
mode.
2
Select wiping with or keys
and press key.
3
Select the head and set the execution/
non-execution of cleaning.
(1) Select the head with or keys.
(2) Select execution/non-execution of the head
cleaning with or keys.
• Select execution of the head cleaning for all the heads.
Execute cleaning : The color of the ink cartridge which is set is displayed.
Not-execute cleaning : “_” is displayed.
4
Press the key.
5
Select the number of time of wiping
(1 to 10 times) with or keys.
6
Press the key.
• The cleaning will be started.
• When the cleaning is completed, the system is turned to the local mode.
7
Execute test drawing and check the result of the test drawing.
• Repeat cleaning and test drawing until normal result is obtained.
• If the test drawing results have not been improved despite of the repeated head cleaning, it is
necessary to perform the cleaning of wiper or cap. Please refer to P.4-26 "Cleaning of wiper
and cap".
• If the test drawing results have not been improved even after the repeated head cleaning after
performing the cleaning of wiper and cap, please re-fill the ink. ( P.4-20 )
CLEAN I NG
TYPE : no rma l
CLEANING
CLEAN I NG
TYPE :wiping
ENTER
CLEAN I NG
HEAD [ MC
Y
KKYCM]
CLEAN I NG
HEAD [ MC
KKYCM]
ENTER
CLEAN I NG
WI PE NUM. : 1
ENTER
Comments to this Manuals