MIMAKI JV3-160S Setup Guide download pdf (Page 109)

– 5.19 –

5-3-7. HEAD ID

[Function]

The setting value is issued in the maintenance list at the time of maintenance release.

Enter the ID numbers of heads 1 to 3. The input values are stored under system parameters

No. 1 to 3.

The ID numbers are sealed and stuck on each print head.

[Operation]

1) Select the ADJUSTMENT, and then press the

ENTER

key.

2) Select the “HEAD ID”, and then press the

ENTER

key.

3) Press the

ENTER

key again, and then the

ID number can be entered.

Use the

and keys to move left or right.

Use the

and keys to enter the number.

Press the

ENTER

key to finalize the number.

When the

key is pressed, the value

returns to what it was before the change.

4) After the ID numbers of heads 1 to 3 have been

entered, press the key.

The values that were input are stored under system

parameters, and this operation ends.

• Incorrect entry in step 3) results in an error when the

ENTER

key is pressed.

Since the entry remains intact, modify the number and then normally terminate

the entry.

FUNCTION

# ADJUST < ENT >

# ADJUST

HEAD ID < ent >

# INPUT HEAD ∗ .1

∗ ∗ ∗ ∗ ∗ ∗ ∗∗ ∗ ∗ ∗ ∗ ∗ ∗

# INPUT HEAD ∗ .2

∗ • • • • • • • • • • • •

# INPUT HEAD ∗ .3

∗ ∗ • • ∗

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 169 170

Comments to this Manuals

No comments

MIMAKI JV3-160S Setup Guide Page 109

Comments to this Manuals

Related products and manuals for Print & Scan MIMAKI JV3-160S